Drone RF Detector TXPP5000-S1

In the landscape of low-altitude threats, the hardest targets to defend against are often the ones you cannot see. FPV droni, modified UAVs, and low-flying “rogue” aircraft frequently evade cameras and radar—yet they cannot hide from radio frequency. This radio detection equipment passively intercepts drone signals without emitting high-power electromagnetic radiation, and keeps working continuously through rain, megla, tema, and building obstructions.

Covering a wide 70 MHz to 10 GHz band (subject to local frequency regulations), it identifies drone video and control links and simultaneously tracks more than 40 cilje, with a detection range beyond 5 km that can reach 10 km under favorable conditions, while operating with a low false-alarm rate. It captures the drone’s unique electronic fingerprint (SN), distinguishing individual airframes of the same model and resolving the operator’s location; it decodes domestic and international Remote ID standards such as GB42590-2023, ASTM F3411-22a, and ASD-STAN PrEN4709-002, as well as DJI Drone-ID; it also decodes civil aviation ADS-B broadcasts to provide real-time position information.

With average power consumption not exceeding 100 W and support for 7×24 unattended operation, it features built-in GPS auto north-alignment and multi-unit networking for 360° full-airspace coverage and cross-location, with linked execution of countermeasure strategies. A Web interface and RESTful API make it easy to integrate into existing security platforms. It is widely suited to low-altitude detection and operator tracing at airports, zapori, oil depots, borders, and other critical sites.

*Upoštevajte, da so nastopi, Specifikacije in funkcije so lahko brez predhodnega obvestila drugačne.

Model	TXPP5000-S1
Frequency range	70 MHz ~ 10 GHz
Največji obseg zaznavanja	≥3 milje (5 km) Maximum detection distance can exceed 6 miles (10 km); actual performance may vary depending on the electromagnetic environment and drone type.)
Direction finding accuracy	≤20°(RMS, Drone hovering condition; applicable to 2.4 GHz an 5 GHz bands only.)
Največ hkrati sledenje	≥40
Maximum detectable target speed	≥±66 ft/s (±20 m/s)
Pokritost azimuta	0 ~ 360°
Višinska pokritost	0 ~ 90°
Napajanje	AC 80 ~ 264V / DC 113 ~ 370V
Poraba energije	≤ 100W
Delovna temperatura	-20 ~ +60°C
Dimenzije	≤ 14 × 20 v (350480 mm) (DiameterHeight)
Teža	≤ 33 lbs (15 kg) (Main unit only, excluding mounting bracket)

Obrambni sistem proti UAV je sestavljen iz sprednje opreme, kot je radar za zaznavanje, RF detektor, E/O sledilna kamera, Naprava za RF motenje ali ponarejanje in programska oprema platforme za nadzor UAV. Ko dron vstopi v obrambno območje, enota za zaznavanje oddaja natančne podatke o položaju skozi aktivno razdaljo, kota, hitrost in višina. Ob vstopu v opozorilno območje, sistem bo neodvisno določil in sprožil motilno napravo, da bi motila komunikacijo drona, tako da se dron vrne ali pristane. Sistem podpira upravljanje več naprav in več območij ter lahko realizira 7*24 spremljanje v vseh vremenskih razmerah in zaščita pred vdorom dronov.

Obrambni sistem proti UAV je sestavljen iz radarske ali RF detekcijske enote, EO sledilna enota in enota za motenje. Sistem vključuje zaznavanje ciljev, sledenje & priznanje, ukaz & nadzor motenj, več funkcij v enem. Na podlagi različnih scenarijev uporabe, sistem je mogoče fleksibilno razmestiti v optimalno rešitev z izbiro druge detekcijske enote in naprave za motenje. AUDS je možna fiksna namestitev, mobilna ali prenosna v vozilu. Po vrsti fiksne namestitve, AUDS se pogosto uporablja na mestih visoke varnostne zaščite, tip, nameščen na vozilo, se običajno uporablja za rutinsko patruljo ali več, in prenosni tip se veliko uporablja za začasno preprečevanje & nadzor v ključni konferenci, športne prireditve, koncert itd.